How Do I Set Up RawCheats?
Buy the Raw cheat for your game plus the Raw Spoofer add-on, cold boot Windows, run Raw Spoofer as administrator and enter your spoofer license to randomize 16 hardware identifiers, launch the Raw loader and enter the cheat license, select your game from the dropdown, then start the game via Steam, Epic, or Battle.net. Click Inject in the loader at the main menu and press INSERT in-game to open the overlay.
Setting up RawCheats is a fixed seven-step flow that takes around 5 to 10 minutes the first time and under 2 minutes on every session after. The order is load-bearing — running the spoofer before the game launcher matters more than any specific setting inside the cheat menu.
Step 1 — Buy the product and the spoofer
Every cheat product page on rawcheats.com sells the cheat license and the Raw Spoofer license as separate items. Buy both. The spoofer is non-optional if you have ever been hardware-flagged, and inexpensive insurance even if you haven't. Payment routes through Stripe or self-hosted BTCPay, license keys land in your email within seconds.
Step 2 — Cold boot the machine
A cold boot — full power-off, then start, not a restart — flushes anti-cheat boot-time telemetry and ensures the spoofer can intercept identifier reads before any game launcher caches them. Don't open Steam, Epic, Battle.net, the Riot client, or any game-related software yet. The spoofer must run first.
Step 3 — Run Raw Spoofer as administrator
Right-click the spoofer binary, select Run as administrator, paste your spoofer license into the activation field. The spoofer randomizes 16 hardware identifiers: SMBIOS UUID, motherboard serial, all disk serials (SATA and NVMe), every NIC MAC, GPU UUID, MachineGuid, Windows Product ID, RAM SPD, USB controller IDs, PCI device IDs, and monitor EDID. The run takes about 4 seconds and leaves no UAC prompt on subsequent reads.
Step 4 — Launch the Raw loader
Open the cheat loader executable, enter your cheat license in the activation field, and select the target game from the dropdown — Fortnite, Rust, PUBG, Marvel Rivals, Arc Raiders, and so on. The loader checks status against our forum board automatically and refuses to inject if the build is paused for a signature update.
Step 5 — Launch the game
Start the game through its normal launcher — Steam for Rust and PUBG, Epic Games for Fortnite, Battle.net for Overwatch, NetEase for Marvel Rivals. Let the anti-cheat warm up (about 10 seconds on EAC, 15 on BattlEye, longer on Vanguard). Wait at the main menu, not a match.
Step 6 — Inject from the loader
Switch back to the Raw loader and click Inject. The overlay attaches as an external draw layer outside the protected game process, so Easy Anti-Cheat and BattlEye see no memory writes, no DLL load events, no module enumeration anomalies. The cheat menu overlays within 2-3 seconds.
Step 7 — Open the menu and configure
The default keybind is INSERT (rebindable in Settings to General to Menu Key). Configure aimbot, ESP, humanizer, and save to a config slot so you don't redo settings every session. For per-game tuning see the Setup-Safely cluster and the HWID spoofer pillar.
Once the menu opens you're done — close the loader window if you prefer, the cheat stays loaded. For session-to-session reuse, repeat steps 2 through 7 (spoofer, loader, game, inject). The spoofer can be skipped on consecutive sessions if you haven't been flagged, but cold-booting and re-spoofing is the safer habit.
Related Pages
Sources
- About Easy Anti-Cheat — Epic Games
- BattlEye Support FAQ — BattlEye Innovations
- Stripe Security — Stripe
Related Questions
Launch your game first and wait at the main menu, then open the Raw loader, select the matching game from the dropdown, and click Inject. The cheat attaches as an external overlay outside the protected game process, so Easy Anti-Cheat and BattlEye see no DLL load events or memory writes inside the game. The menu opens within 2-3 seconds. Default keybind is INSERT. No manual offsets, no Cheat Engine, no DLL handling required.
Cold boot Windows before launching anything, right-click the Raw Spoofer binary and select Run as administrator, paste your spoofer license into the activation field, and click Spoof. The tool randomizes 16 hardware identifiers including SMBIOS UUID, motherboard serial, disk serials, MAC addresses, GPU UUID, MachineGuid, RAM SPD, and monitor EDID in about 4 seconds. Reboot is not required. Launch your cheat loader and game afterward.
Most injection issues come from five causes: the game wasn't fully loaded at the main menu when you clicked Inject, the loader caught a paused signature update on the forum status board, Windows Defender quarantined the loader binary, you ran the loader and game at mismatched admin levels, or you skipped the spoofer cold boot. Check the forum status first, then re-run with admin, then verify Defender exclusions. Discord support averages under 10 minutes during waking hours.
First-time setup takes 5-10 minutes — cold boot (about 60s), run Raw Spoofer as admin (4s spoof time + license activation), launch the Raw loader and enter cheat license (about 30s), launch the game and wait for anti-cheat init (about 15s), click Inject (2-3s overlay attach), and configure aimbot/ESP settings (3-5 minutes if tuning carefully). Subsequent sessions take under 2 minutes once your config slot is saved.
The safe order is: cold boot Windows, run Raw Spoofer as administrator to randomize 16 hardware identifiers, launch the Raw loader and enter your cheat license, open the game via Steam, Epic, Battle.net, or NetEase, wait at the main menu for the anti-cheat to initialize, click Inject in the loader, then press INSERT to open the menu. Skipping the spoofer step or launching the game before the loader breaks the chain.
