How Do I Install Raw Spoofer?
Cold boot Windows before launching anything, right-click the Raw Spoofer binary and select Run as administrator, paste your spoofer license into the activation field, and click Spoof. The tool randomizes 16 hardware identifiers including SMBIOS UUID, motherboard serial, disk serials, MAC addresses, GPU UUID, MachineGuid, RAM SPD, and monitor EDID in about 4 seconds. Reboot is not required. Launch your cheat loader and game afterward.
Raw Spoofer is a single-binary tool with no installer, no service, and no persistent driver. It runs once per session, randomizes the identifiers anti-cheats fingerprint, then exits. The install workflow is the same on Windows 10 and Windows 11, on Intel and AMD hardware, with NVIDIA, AMD, or Intel GPUs.
Why cold boot first
Anti-cheat telemetry — especially BattlEye and Easy Anti-Cheat — caches hardware identifiers when the game launcher first opens. If Steam, Epic, or Battle.net is already running when you spoof, the cached identifiers persist for that session and the spoof effectively does nothing for that launch. A full power-off and cold start clears those caches. Restart from the Start menu is not the same as a cold boot on Windows 10/11 due to Fast Startup hibernating kernel state.
Why administrator
The 16 identifiers Raw Spoofer touches live in protected locations: SMBIOS lives in firmware (read via WMI calls that require elevated tokens), disk serials require direct ATA queries, MAC addresses require NDIS-level rewrite, and MachineGuid lives in a protected HKLM registry key. Running without elevation produces a partial spoof — the cheap identifiers move, the load-bearing ones don't, and a kernel anti-cheat sees the mismatch.
What gets randomized
Raw Spoofer randomizes SMBIOS UUID, SMBIOS serial number, manufacturer string, product string, BIOS strings, motherboard serial, every SATA and NVMe disk serial, GPT and MBR partition layout signatures, every NIC's permanent MAC address, GPU UUID, MachineGuid (HKLM\Software\Microsoft\Cryptography), Windows Product ID, Windows install date, RAM SPD (DDR4/DDR5), USB controller IDs, PCI device IDs, and monitor EDID strings. The randomized values look like factory defaults from common OEMs, not obvious random hex.
What Raw Spoofer does not touch
The TPM 2.0 endorsement key is read-only firmware and unspoofable from Ring 3, so we leave it alone — touching it produces detection patterns worse than a flagged EK. Microsoft Pluton is similarly read-only. Ring-3 CPU ID and Microsoft Remote Attestation chains are not addressed by the user-mode tool. The current threat model for most kernel anti-cheats (EAC, BattlEye, Vanguard, NeacSafe, Zakynthos) does not yet rely on those unspoofable surfaces for primary HWID matching, so the practical coverage is high.
Run the binary
Right-click raw-spoofer.exe, choose Run as administrator, paste your spoofer license, click Spoof. Output reads Spoofed 16/16 identifiers in 4.2s. You are clear to launch. Close the window. The binary exits cleanly — no resident service, no scheduled task, no kernel driver.
Verify the spoof
Open an elevated PowerShell and run Get-WmiObject win32_baseboard | Select SerialNumber and Get-WmiObject win32_bios | Select SerialNumber. The values should change between runs. Volume serials change too — vol C: shows a new ID. If any read still returns the original, the spoofer ran without admin — re-run with elevation.
After spoofing
Launch the Raw cheat loader, enter your cheat license, select your game, then start the game via its launcher. The spoof persists until the next reboot. If you reboot and want the same session to continue, re-run the spoofer first. Don't reboot mid-session unless you intend to re-spoof.
For the full safety workflow, pair this with the setup-safely cluster and the HWID spoofer pillar. For a deeper look at why each identifier matters see the Raw Spoofer product page.
Related Pages
Sources
- BattlEye Support FAQ — BattlEye Innovations
- About Easy Anti-Cheat — Epic Games
- Microsoft Pluton Security Processor — Microsoft
Related Questions
Launch your game first and wait at the main menu, then open the Raw loader, select the matching game from the dropdown, and click Inject. The cheat attaches as an external overlay outside the protected game process, so Easy Anti-Cheat and BattlEye see no DLL load events or memory writes inside the game. The menu opens within 2-3 seconds. Default keybind is INSERT. No manual offsets, no Cheat Engine, no DLL handling required.
Buy the Raw cheat for your game plus the Raw Spoofer add-on, cold boot Windows, run Raw Spoofer as administrator and enter your spoofer license to randomize 16 hardware identifiers, launch the Raw loader and enter the cheat license, select your game from the dropdown, then start the game via Steam, Epic, or Battle.net. Click Inject in the loader at the main menu and press INSERT in-game to open the overlay.
Yes, every session if you have ever been hardware-flagged, and as cheap insurance even if you haven''t. Cold boot Windows, run Raw Spoofer as administrator before opening Steam, Epic, Battle.net, or NetEase. The spoof persists until reboot. Skipping the spoofer means one signature detection bans your hardware permanently across every account on that machine. The 4-second spoof time per session is the cheapest insurance in the cheat workflow.
Modern anti-cheats fingerprint a composite of 16+ identifiers: SMBIOS UUID, motherboard serial, all disk serials (SATA + NVMe), every NIC''s MAC address, GPU UUID, MachineGuid (Windows registry), Windows Product ID, Windows install date, RAM SPD strings, USB controller IDs, PCI device IDs, monitor EDID, BIOS strings, TPM 2.0 endorsement key (unspoofable from user-mode), CPU ID, and Microsoft Remote Attestation. Raw Spoofer randomizes 13 of these; TPM EK and Pluton are firmware-baked and out of reach.
The safe order is: cold boot Windows, run Raw Spoofer as administrator to randomize 16 hardware identifiers, launch the Raw loader and enter your cheat license, open the game via Steam, Epic, Battle.net, or NetEase, wait at the main menu for the anti-cheat to initialize, click Inject in the loader, then press INSERT to open the menu. Skipping the spoofer step or launching the game before the loader breaks the chain.
